|
|
 |
Molded grating --- Brief Guide |
|
Brief introduction of
Sui Generis Molded grating:
Continuous
fiberglass roving is placed in the open, heated mold in
alternating layers, wetted out thoroughly with resin. Such a
process produce an integral, one- piece construction, which
offers excellent corrosion resistance and bi-directional
strength as well.
The mould is heated
to cure the panel after such a fiberglass-roving- weaving
process. If embedded grit top surface is required for extra
anti-slip, the mould will receive grit at this time before the
panel is cured.
Upon curing, the panel
is ejected from the mould, and at this time, the panel will
typically have a concave(meniscus) top surface for slip
resistance. Should a standard applied-grit top surface is
needed, a secondary operation follows, that is: the grit will
be bonded to the top of the completed panel.
|
 |
 |
|
|
Products: Frp grating, Fiberglass grating, Pultruded grating, Pultruded shapes |
|
